Independent Third-Party Inspection
Precision Inspection for Mission-Critical Projects
3BPSPP d.o.o. places a qualified inspector inside the factory that builds your equipment. Coordinated from Ljubljana, with offices in Xi’an and Changwon, for vendor inspection, QA/QC and expediting verified to ASME, API, EN/PED and ISO requirements.
- ASME · API · ISO Codes
- EN / PED Verification
- Slovenia · China · Korea
- 50+ Countries Covered
Why buyers put us between them and their vendors
One independent partner, from the first hold point to final release — so your project proceeds on verified fact, not a supplier’s assurance.
Genuinely independent
We do not manufacture, design or sell equipment. Our release note means the equipment met the code — nothing is rounded up to protect a schedule.
- Item
- 001
- Sheet
- 1 of 4
- Rev
- A
Anchored to the code
Every finding is written against your ITP, the applicable code and the agreed hold and witness points — evidence you can defend to any owner or insurer.
- Item
- 002
- Sheet
- 2 of 4
- Rev
- A
At the point of manufacture
An inspector at the vendor’s works, where your equipment is actually made, rather than a report reviewed remotely from a desk.
- Item
- 003
- Sheet
- 3 of 4
- Rev
- A
One accountable partner
The same team plans the inspection, reviews every report and signs off — project after project, across disciplines and borders.
- Item
- 004
- Sheet
- 4 of 4
- Rev
- A
Service register
Six Service Families. One Standard of Assurance.
From pre-order vendor assessment to final release and expediting — the full scope of independent inspection, under one controlled quality system.
- TPI-001Vendor & Source InspectionIndependent third-party inspection of equipment at vendor works and project sites — from vendor and source inspection through in-process, final, and pre-shipment stages.
- EXP-001Expediting & Progress MonitoringDesk and field expediting that keeps equipment and materials on schedule — milestone verification, schedule monitoring, bottleneck identification, and progress reporting.
- TTV-001Testing & Technical VerificationWitnessing and verification of factory and site testing — FAT/SAT, functional and performance tests, pressure testing, and NDT supervision — against approved procedures.
- QA-001QA/QC & Project Quality SupportQuality assurance and control support across the project — QA/QC supervision, quality surveillance, NCR/CAPA follow-up, and welding, coating, and E&I quality control.
- DRC-001Documentation Review & ComplianceReview of quality and manufacturing records against project requirements — ITP/QCP, WPS/PQR/WPQ, material certificates, NDT records, and final dossiers, with traceability verification.
- TAS-001Technical Audits & Supplier AssessmentIndependent assessment of supplier capability and quality systems — supplier and capability audits, process and quality-system audits, and project-specific compliance audits.
What each number counts
Not rounded-up marketing figures — the live register behind the work.
- 50+
- Countries coveredDocumented inspection across Europe, the Middle East & Asia
- 15
- Industries servedFrom oil & gas and power to pharma and heavy fabrication
- 3
- Offices, Europe and AsiaVerified, reported and closed out under our QMS
- 10+
- Years independentAn independent third party since 2015
Six Core Industries. Nine More Supported.
Where our inspectors already know the equipment, the codes and the critical control points.
Oil & Gas
Upstream, midstream and gas processing equipment — wellhead and flow control, separation packages, and the line pipe and fittings that carry the product.
- Sector
- EP-01
Petrochemical & Chemical
Refining and chemical process plant: columns, reactors, heat exchangers and the process piping that ties them together, where containment is the whole safety case.
- Sector
- EP-02
Power Generation
Thermal and combined-cycle generation — boilers, turbines, generators, transformers and the balance-of-plant equipment around them.
- Sector
- EP-03
Industrial Components
Valves, fittings, instrumentation, electrical panels and packaged units — high-count, multi-vendor scopes that need one consistent inspection standard.
- Sector
- MI-03
Steel & Pressure Equipment
Pressure vessels, tanks and heavy fabricated steel — the equipment where welding qualification, NDT and dimensional control decide acceptance.
- Sector
- MI-01
Pipelines & Storage
Transmission pipe, line pipe coating, valves and storage tanks — long lead items where a coating or weld defect is discovered a long way from the mill.
- Sector
- IB-01
Inspection, on the record
A sample of recent assignments — each verified against the code and closed out with a traceable report.
Featured Project
Independent Inspection and No-Load Testing of Heavy-Duty Industrial Gear Units
A large industrial project required verification of heavy-duty gear units intended for a mechanical drive package. At the manufacturing stage, independent inspection was needed to assess equipment condition, key dimensions, surface protection and operating behavior before the units progressed toward final acceptance and shipment. The inspection visit covered one gear unit undergoing a no-load test, another finished unit available for dimensional and coating checks, and additional units still in assembly.
- Record
- Featured project
- Region
- Finland
Supplier Quality & Capability Audit of a Gas Turbine Component Manufacturer in Croatia
3BPSPP d.o.o. conducted an on-site supplier quality and capability audit at a specialized industrial manufacturing facility in Croatia on 22 October 2026. The manufacturer specializes in production, reconditioning and reverse engineering of gas turbine components and associated engineering parts. The assessment reviewed technical and organizational capability, quality management, production controls, procurement, health and safety, and relevant compliance arrangements.
- Status
- Completed
- Region
- Croatia
Supplier Capability Audit for Offshore Fire-Rated Panel Systems
An offshore infrastructure project required an evidence-based assessment of a prospective manufacturer of fire-rated doors, wall panels and ceiling systems. The objective was to establish whether the manufacturer had the technical capability, production controls, documented quality system and relevant product evidence to support potential supplier qualification. The assessment was conducted at a manufacturing facility in Slovenia over two days.
- Status
- Completed
- Region
- Slovenia
Re-Inspection of 16,602 Packable Hiking Jackets in Austria
3BPSPP d.o.o. supported an on-site final re-inspection of a large shipment of men’s and women’s packable hiking jackets at a logistics facility in Austria. The assignment focused on verifying corrected product labeling, carton assortments, packaging, and the visible condition of sampled garments against the supplied inspection requirements before a shipment decision.
- Status
- Completed
- Region
- Austria
Transformer Tank Dimensional and Penetrant Inspection — Italy
3BPSPP d.o.o. provided independent inspection support for the dimensional verification and liquid penetrant examination of fabricated transformer tank and cover components at a manufacturing facility in Italy.
- Status
- Completed
- Region
- Italy
Industrial Oil-Purifier Factory Acceptance Testing — Italy
3BPSPP d.o.o. provided independent third-party inspection and Factory Acceptance Test witnessing for a skid-mounted industrial oil-purifier package at a manufacturing facility in Italy. The assignment covered visual inspection, equipment verification, functional testing, completeness review, and inspection of packing and identification requirements.
- Status
- Completed
- Region
- Italy
Certified where it counts
Our Quality Management System is certified to ISO 9001:2015 by Bureau Veritas — an accredited third-party audit of how every inspection is planned, delivered and recorded.
ISO 9001:2015
Quality Management System certified by Bureau Veritas. Certified scope: independent third-party inspection services for industrial projects (IAF 34).
- Standard
- ISO 9001:2015
- Body
- Bureau Veritas
- Status
- Certified
- Certificate No.
- SI014270
- Scope
- Third-party inspection
Put an independent set of eyes on your supply chain
Tell us what you’re building, and where it’s being made.
We’ll assign a lead inspector and map the inspection plan that protects your project — before the first weld, not after the equipment arrives.
- A named lead inspector for your discipline
- An inspection plan mapped to your ITP and code
- An inspector at the vendor’s works, worldwide
- Action
- Inquiry
- Rev
- A